USB to ALDL Cable comes with 5' USB extension cable, and Driver/Software CD. This cable is compatible with programs such as WinALDL and TunerPro RT. Use it with your Android device - Works with ALDLdroid! USB Drivers are needed for almost all products. You only need one driver package for ALL Moates USB products. One for all and all for one? As a rule of thumb, the WHQL drivers which will be downloaded automatically will work fine. However, it is recommended that you use the drivers from our site with Win98, WinXP. USB to ALDL CABLE Plug your laptop into the ALDL port of your 82 to 95 GM computer controlled car or truck and see what is happening under the hood.

Does not work by itself, needs the CABL1 or CABL2 to work! USB-based ALDL converter box. Goes between your PC and a CABL1 or CABL2.

Works great, unlike most USB/Serial converters. Goes straight from USB to ALDL. Does NOT work with a serial port. Compatible with all the popular programs in Windows (TunerProRT, DataMaster, TunerCat, EFILiveV4/OBD1, WinALDL). Will do 160-baud and 8192-baud communication. Not for use with the 'Moates' ECM852 software or other DOS-based programs.

Self-powered via USB, and it has a built-in switch to select mode (10k or Open) for the A-B pins. Comes with a 6-ft USB cable, but requires either the CABL1 or CABL2 for connection to the car, depending on your application. The RJ-type-looking connector you see in the picture is for the New-Style CABL1 and CABL2, and it is not a standard RJ-type connector.

It is also NOT compatible with the old-style AutoXray type cables.

USB to ALDL CABLE Plug your laptop into the ALDL port of your 82 to 95 GM computer controlled car or truck and see what is happening under the hood. Prank Programs Blogspot Com. Use as a scan tool. Compatible with GM OBDI data streams that use the 8192 Baud, Pin M protocol AND 160 Baud Pin E protocol. The cable may be ordered with the 12 pin connector shown here, the 94 & 95 16 pin connector, or with universal bare pins. Dragon Ball Gt Transformation 2 Gba.

12 Pin versions have built in the 10K ohm resistor required by some ECMs. The resistor can also be switched off if needed.